Search
导航菜单
GUIDE
文章正文
Plastic formwork - correct way of using
Published:2017-12-29 07:02:10    Text Size:【BIG】【MEDIUM】【SMALL

When using BEIZHU plastic formwork ,maybe you will face some technique problems ,here will show some key points for your easy using and avoid some diffcults.


1.Please avoid the peak of the temperature when matching the moulds. Then the concrete finish after releasing moulds will be better.

2.When matching moulds for column, beam and balcony, please use package pressure process.

3.When store the plastic formwork ,please put is as flat as plywood formwork to prevent the deformation after releasing .

4.Please ensure that your building workers have technique trained when you use this kind of plastic formwork in the first time. This is an essential part.

5.Method of use as well as wooden template , hollow plastic formwork reinforcement direction with batten direction placed in cross shaped.

6. No need to smear the mold release agent before using BEIZHU plastic formwork.

7.When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keel should be 10 ~ 20 cm.

8. The seam-line between templates should be taped.

9.The length of nail should not be too long, generally about 30 ~ 35 mm.

10.The strength to drive nails should be moderate.

11.When removing the formwork, should start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.

12. The plastic formwork accesses to be mixed used with wood veneer, bamboo veneer and other material plate.

 

Email:beizhu07@beizhugroup.com

Ph(whatsapp):+86-15386899894

Skype:beizhu07@beizhugroup.com

PRODUCTS SEARCH
News
脚注信息
Copyright(C)2009-2012  Company website templates